Oven and range repair, Santa Cruz County

Oven Repair in Santa Cruz, CA

Oven and range repair in Santa Cruz County

Most oven calls are about no heat or uneven heat, a burner that will not light, a door that will not close, self-clean faults, or a dead control panel.

Check the oven mode and the breaker first. Some ovens sit in a timer or lock mode and look broken.

If you smell gas, leave the building and call 911 or PG&E, the gas utility in Santa Cruz County, from outside. Do not use switches, phones or flames inside. Do not try to relight a burner if you smell gas.

Common oven and range problems

Tell us if the oven is gas or electric, and if the fault is in the oven, the cooktop or both.

Oven not heating or heating unevenly

Electric: a bake or broil element or a temperature sensor. Gas: an igniter that glows but does not light the burner, or a gas valve fault.

Burner or igniter not working

Usual causes: a wet or dirty burner cap, a worn igniter or a spark module fault.

Door will not latch or close

Usual causes: worn hinges, a latch fault or a lock stuck after self-clean.

Self-clean problems

Usual causes: a door lock that will not release, or a blown thermal fuse after a long self-clean cycle.

Control panel or display not responding

Usual causes: a tripped breaker, a lock mode, a failed control board or a touch pad fault.

Gas smell

Leave the building and call from outside. This is not a repair request. It is a safety call.

Oven Repair cost in Santa Cruz

ItemPrice
Diagnostic visit$99
Labor$75–$150 per hour
Oven repair, typical total$150–$350
Igniter, element, sensor or other single partQuoted after diagnosis
Control boardQuoted after diagnosis

Ranges quoted by Santa Cruz appliance repair pages, November 2026; your quote depends on the diagnosis. The $99 diagnostic visit is our fee. The labor row is a general local figure for all appliances, not for this appliance alone. Rows marked "Quoted after diagnosis" have no local published range.

How oven repair works with us

  1. Check one thing first. Check that the oven is set to bake and not to a timer mode, and that the breaker has not tripped. The model number is usually on the frame behind the oven door or the storage drawer.
  2. Send a request. Tell us the brand, the model number, what the appliance does, when it started and any error code. Use the estimate form.
  3. Get the price model before the visit. We tell you the price before anyone comes out: the diagnostic visit is $99. Reply time: within one business day.
  4. Diagnosis and written quote. The technician finds the cause and gives you a price for the repair before any work starts.
  5. You decide. Approve the repair, ask questions, or stop at the diagnosis. If repair costs close to half the price of a new unit, we say so.
  6. Repair and test. We fit the part and run the appliance to check the fault is gone before we leave.

Why us

Price before work

You get the diagnostic fee before the visit and a repair quote before any part is fitted.

You stay in control

Each step needs your yes. You can stop after the diagnosis.

Cheap checks first

We tell you what to check yourself before you pay for a visit.

Repair or replace, said plainly

If the repair does not make sense for the age of the unit, we tell you.